ReneWave Store

TCL Solar · TCL-G12-725-66P

A large-format bifacial module for arrays where structure, handling and string-current limits are designed around the exact reference.

TCL Solar · TCL-G12-620-66P

A narrower-format bifacial module for roofs where usable layout, handling and string-current limits drive the exact reference.

Canadian Solar · CS7N-705TB-AG

A large-format 705 W bifacial module for arrays whose structure, access and electrical design support the exact reference.

Canadian Solar · CS7N-710TB-AG

A large-format 710 W bifacial module for arrays whose structure, access and electrical design support the exact reference.

Canadian Solar · CS7N-715TB-AG

A large-format 715 W bifacial module for arrays whose structure, access and electrical design support the exact reference.

Canadian Solar · CS7N-720TB-AG

A large-format 720 W bifacial module for arrays whose structure, access and electrical design support the exact reference.

JinkoSolar · JKM590N-72HL4-BDV

A 590 W bifacial module for commercial arrays where roof coverage, current limits and handling favor its format.

JinkoSolar · JKM620N-66HL4M-BDV

A 620 W bifacial module assessed against the complete array, structure and conversion design rather than a five-watt difference.

JinkoSolar · JKM625N-66HL4M-BDV

A high-output bifacial module for arrays whose structure, handling and electrical design support its format and current.

JinkoSolar · JKM720N-66HL5-BDV

A large-format 720 W bifacial module for arrays designed around its width, handling weight and higher string current.

Huawei FusionSolar · SUN2000-3KTL-L1

A compact two-MPPT solar inverter for single-phase systems, with optional Huawei storage and backup equipment confirmed separately.

Deye · SUN-5K-SG05LP1-EU

A 5 kW low-voltage hybrid inverter coordinating two PV trackers, 48 V storage, grid or generator charging and a protected load output.

Deye · SUN-10K-SG02LP1-EU-AM3

A 10 kW low-voltage hybrid inverter coordinating three PV trackers, a high-current 48 V storage interface and a protected load output.

MUST · PV19-10048-EXP

A dual-MPPT off-grid inverter/charger for a reviewed 48 V battery system and one exclusively selected utility or generator AC source.

MUST · PV18-6248-PREM

Mode-dependent off-grid conversion: 6.2 kW with PV input above 1,000 W, 5.5 kW in battery mode.

MUST · PV18-4024-PREM

Mode-dependent off-grid conversion: 4 kW with PV input above 1,000 W, 3.5 kW in battery mode.

MUST · PV18-3524-PREM

Single-phase off-grid conversion and controlled charging for a reviewed 24 V battery architecture.

MUST · PV30-6048-VHM

Single-phase off-grid conversion and controlled charging for a reviewed 48 V battery architecture.

Deye · SUN-10K-SG05LP3-EU-SM2

A three-phase hybrid inverter coordinating two PV trackers, a high-current 48 V battery interface, utility, generator and selected-load backup paths.

Deye · SUN-20K-SG05LP3-EU-SM2

A higher-output three-phase hybrid inverter coordinating two PV trackers, two 48 V battery inputs, utility, generator and selected-load backup paths.

Deye · SUN-12K-SG04LP3-EU

A 12 kW three-phase hybrid inverter coordinating two PV trackers, a high-current 48 V battery interface and selected-load backup paths.

Deye · SUN-20K-SG01HP3-EU-AM2

A three-phase hybrid inverter coordinating two PV trackers, one high-voltage lithium storage interface, utility, generator and selected-load backup paths.

Deye · SUN-30K-SG02HP3-EU-AM3

A 30 kW three-phase hybrid inverter coordinating three PV trackers, high-voltage lithium storage, utility, generator and selected-load backup paths.

Deye · SUN-50K-SG01HP3-EU-BM4

A 50 kW three-phase hybrid inverter coordinating four PV trackers, two high-voltage lithium battery inputs, utility, generator and selected-load backup paths.

Deye · SUN-80K-SG02HP3-EU-EM6

An 80 kW three-phase hybrid inverter coordinating six PV trackers, two high-voltage lithium battery inputs, utility, generator and selected-load backup paths.

Huawei FusionSolar · SUN2000-5KTL-M1-EU

A two-MPPT three-phase solar inverter with a separately validated Huawei storage and selected-load backup path.

Huawei FusionSolar · SUN2000-5K-MAP0

A three-phase hybrid inverter with two MPPTs and separately validated Huawei storage and SmartGuard backup paths.

Huawei FusionSolar · SUN2000-8K-MAP0

A three-phase hybrid inverter with two MPPTs and separately validated Huawei storage and SmartGuard backup paths.

Huawei FusionSolar · SUN2000-10K-MAP0

A three-phase hybrid inverter with two MPPTs and separately validated Huawei storage and SmartGuard backup paths.

Huawei FusionSolar · SUN2000-15K-MB0

A higher-capacity three-phase hybrid inverter with four designed PV inputs, two storage terminals and separately engineered SmartGuard backup.

Huawei FusionSolar · SUN2000-20K-MB0

A 20 kW three-phase hybrid inverter with four designed PV inputs, two storage terminals and a separately engineered SmartGuard path for selected single-phase backup loads.

Huawei FusionSolar · SUN2000-30KTL-M3

A four-MPPT commercial string inverter for calculated three-phase PV arrays, with no battery or backup function.

Huawei FusionSolar · SUN2000-40KTL-M3

A four-MPPT commercial string inverter for calculated 40 kW three-phase PV arrays, with no battery or backup function.

Huawei FusionSolar · SUN2000-50KTL-M3

A four-MPPT commercial string inverter for calculated 50 kW three-phase PV arrays, with no battery or backup function.

Huawei FusionSolar · SUN2000-100KTL-M2

A 10-MPPT commercial string inverter for calculated 100 kW three-phase PV plants, with no battery or backup function.

Huawei FusionSolar · SUN2000-115KTL-M2

A 10-MPPT commercial string inverter for calculated 115 kW three-phase PV plants, with no battery or backup function.

Huawei FusionSolar · SUN2000-150K-MG0

A 7-MPPT commercial string inverter for calculated 150 kW three-phase PV plants, with no battery or backup function.

Huawei FusionSolar · LUNA2000-5-E1

A 5 kWh LiFePO4 module for Huawei LUNA2000-S1 storage. It requires the separate C1 power module and a compatible Huawei inverter.

Huawei FusionSolar · LUNA2000-5-E0

A cell-containing 5 kWh S0 battery module used behind the separately ordered LUNA2000-5KW-C0 controller.

Dyness · S51100

A cell-containing 5.12 kWh LiFePO4 module for a controlled Dyness STACK100 high-voltage cluster.

Dyness · DL5.0C

A 51.2 V LiFePO4 battery with integrated BMS for a separately validated low-voltage inverter/charger architecture.

Dyness · POWERBOX-PRO

A weather-protected 51.2 V LiFePO4 battery with integrated BMS for a separately validated low-voltage inverter/charger architecture.

OUTDO · OT100-12GEL

Rate-defined 12 V GEL storage for an engineered battery bank and compatible inverter/charger.

OUTDO · OT150-12GEL

A rate-defined sealed GEL battery for a deliberately designed DC bank and compatible inverter/charger.

OUTDO · OT200-12GEL

A rate-defined sealed GEL battery for a deliberately designed DC bank and compatible inverter/charger.

OUTDO · OT270-12GEL

A high-capacity sealed GEL battery for a deliberately designed DC bank and compatible inverter/charger.

VEICHI · VEICHI-4VSA

A complete AC pump and motor assembly selected for the flow and total dynamic head of your borehole.

VEICHI · VEICHI-4VSP

A complete AC pump and motor assembly selected for the flow and total dynamic head of your borehole.

VEICHI · VEICHI-6VSP

A complete AC pump and motor assembly selected for the flow and total dynamic head of your borehole.

Huawei FusionSolar · LUNA2000-10KW-C1

The C1 controls a Huawei S1 stack of one to three E1 battery modules. Battery modules and the compatible inverter are ordered separately.

Huawei FusionSolar · LUNA2000-5KW-C0

The power-control layer for a modular Huawei LUNA2000-S0 stack; it contains no battery cells or usable energy capacity.

Dyness · SBDU100

The protection, communication and high-voltage connection layer for a Dyness STACK100 cluster; no battery cells or energy capacity are included.

Huawei FusionSolar · SD-WLAN

WLAN or Ethernet through a router for a compatible Huawei inverter monitoring architecture.

Huawei FusionSolar · SD-4G

Cellular monitoring through a mobile network for a compatible Huawei inverter monitoring architecture.

Huawei FusionSolar · SMARTLOGGER3000A

Plant-level communications, commissioning and control coordination for reviewed Huawei PV architectures.

CHINT · DTSU666-H-100A

Three-phase current, voltage, power and energy measurement for compatible Huawei control architectures.

Huawei FusionSolar · SMARTGUARD-63A-T0

Switching, measurement and energy control for compatible Huawei backup architectures; it performs no power conversion.

ABB · M202-32A

Short circuits, subject to the verified installation and breaking-capacity rating.

ABB · IN FH202 40A-30mA/AC

Residual-current faults of the Type AC waveform at a rated sensitivity of 30 mA.

ABB · S202L-C63

Overload and short circuits when the circuit design and rated breaking capacity are suitable.

ABB · SH203-C16

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S203-C25

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · M203-32A

No overload protection in this device. A separate coordinated overload device is required; this is not a complete motor-protection assembly.

ABB · S203-D50

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S203-C80

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S803P-C80

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S803P-C100

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S803N-C125

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · 1SDA067057R1

L protects against overload; short-circuit protection is selected as delayed S or instantaneous I, not both simultaneously. No G function is claimed.

ABB · 1SDA067062R1

No overload protection in this device. A separate coordinated overload device is required; this is not a complete motor-protection assembly.

ABB · S204L-C16

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S204-C20

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S204-C40

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · S204L-C63

Protects the selected circuit against overload and short circuit. The current rating and trip curve must suit the load, conductors and installation.

ABB · 1SDA066765R1

A four-pole molded-case breaker with fixed thermal overload protection at 80 A and fixed magnetic short-circuit threshold at 800 A. The 125 A frame is not the selected trip rating. No residual-current function is built in.

Hager · CFC225F

CFC225F monitors leakage on 1P+N · 2P at 300 mA, Type AC. Its 25 A rating is the carrying current, not an overload-trip setting.

Hager · CFC240F

CFC240F monitors leakage on 1P+N · 2P at 300 mA, Type AC. Its 40 A rating is the carrying current, not an overload-trip setting.

Hager · CFC263F

CFC263F monitors leakage on 1P+N · 2P at 300 mA, Type AC. Its 63 A rating is the carrying current, not an overload-trip setting.

Hager · CFC440F

CFC440F monitors leakage on 3P+N · 4P at 300 mA, Type AC. Its 40 A rating is the carrying current, not an overload-trip setting.

Hager · CFC463F

CFC463F monitors leakage on 3P+N · 4P at 300 mA, Type AC. Its 63 A rating is the carrying current, not an overload-trip setting.

Hager · MW116

MW116 protects 1 poles against overloads and short circuits, with a C curve and 16 A rating. Match the circuit conductors and starting duty to this exact reference.

Hager · MV225

MV225 protects 2 poles against overloads and short circuits, with a B curve and 25 A rating. Match the circuit conductors and starting duty to this exact reference.

Hager · MV440

MV440 protects 4 poles against overloads and short circuits, with a B curve and 40 A rating. Match the circuit conductors and starting duty to this exact reference.

Hager · HMC380

HMC380 protects 3 poles against overloads and short circuits, with a C curve and 80 A rating. This is a modular DIN-rail breaker, not a molded-case compact breaker.

Hager · HMC399

HMC399 protects 3 poles against overloads and short circuits, with a C curve and 125 A rating. This is a modular DIN-rail breaker, not a molded-case compact breaker.

Hager · HMK499

HMK499 protects 4 poles against overloads and short circuits, with a C curve and 125 A rating. This is a modular DIN-rail breaker, not a molded-case compact breaker.

Schneider Electric · EZ9F32263

Easy9 EZ9F32263: 2 protected poles, 63 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · EZ9F32363

Easy9 EZ9F32363: 3 protected poles, 63 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9N18365

Acti9 C120N A9N18365: 3 protected poles, 80 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9N18468

Acti9 C120H A9N18468: 3 protected poles, 80 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77225

Acti9 iC60N A9F77225: 2 protected poles, 25 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77240

Acti9 iC60N A9F77240: 2 protected poles, 40 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77320

Acti9 iC60N A9F77320: 3 protected poles, 20 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77325

Acti9 iC60N A9F77325: 3 protected poles, 25 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77340

Acti9 iC60N A9F77340: 3 protected poles, 40 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77363

Acti9 iC60N A9F77363: 3 protected poles, 63 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77440

Acti9 iC60N A9F77440: 4 protected poles, 40 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77450

Acti9 iC60N A9F77450: 4 protected poles, 50 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · A9F77463

Acti9 iC60N A9F77463: 4 protected poles, 63 A C curve. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV2P08

TeSys GV2P GV2P08: 3 protected poles, thermal adjustment 2.5–4 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV2P16

TeSys GV2P GV2P16: 3 protected poles, thermal adjustment 9–14 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV2P20

TeSys GV2P GV2P20: 3 protected poles, thermal adjustment 13–18 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV2P22

TeSys GV2P GV2P22: 3 protected poles, thermal adjustment 20–25 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV2ME16

TeSys GV2ME GV2ME16: 3 protected poles, thermal adjustment 9–14 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV3P401

TeSys GV3P GV3P401: 3 protected poles, thermal adjustment 30–40 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV3P50

TeSys GV3P GV3P50: 3 protected poles, thermal adjustment 37–50 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV3P501

TeSys GV3P GV3P501: 3 protected poles, thermal adjustment 37–50 A. Thermal overload and magnetic short-circuit protection.

Schneider Electric · GV3P80

TeSys GV3P GV3P80: 3 protected poles, thermal adjustment 70–80 A. Thermal overload and magnetic short-circuit protection.

Suntree · SL7-63-NP-2P-C32-800V

SL7-63 non-polarized 2P C32 breaker for a documented 800 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-4P-C32-1000V

SL7-63 non-polarized 4P C32 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SRF-30-1000V

10 × 38 mm photovoltaic gPV fuse links, 1000 V DC. Select the 15 A, 16 A or 30 A rating; the compatible holder is separate.

Suntree · SL7-63-NP-4P-C16-1000V

SL7-63 non-polarized 4P C16 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-4P-C20-1000V

SL7-63 non-polarized 4P C20 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-4P-C40-1000V

SL7-63 non-polarized 4P C40 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-4P-C50-1000V

SL7-63 non-polarized 4P C50 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-4P-C63-1000V

SL7-63 non-polarized 4P C63 breaker for a documented 1000 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-2P-C16-800V

SL7-63 non-polarized 2P C16 breaker for a documented 800 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-2P-C50-800V

SL7-63 non-polarized 2P C50 breaker for a documented 800 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SL7-63-NP-2P-C20-550V

SL7-63 non-polarized 2P C20 breaker for a documented 550 V DC configuration. Thermal-magnetic interruption protects against qualifying overloads and short circuits.

Suntree · SM8-250HPV-2P-100A-1000V

SM8-250HPV/2 molded-case DC breaker: 250 A frame, 100 A rated current, two poles at 1000 V DC. Overload and instantaneous short-circuit protection; no C-curve rating is claimed.

Suntree · SM8-250HPV-2P-250A-1000V

SM8-250HPV/2 molded-case DC breaker: 250 A frame, 250 A rated current, two poles at 1000 V DC. Overload and instantaneous short-circuit protection; no C-curve rating is claimed.

Suntree · SRD-30-1P-30A-1100V

SRD-30 one-pole photovoltaic fuse holder, 30 A maximum at 1100 V DC, for separately selected 10 × 38 mm gPV links. The holder alone does not interrupt fault current. PV-0: do not open under load.

Suntree · SUP2-PV-2P-500V

Two-module photovoltaic surge protector, connected in parallel with the DC circuit. Diverts transient surges to protective earth; separate overcurrent protection is required. Uc and Up depend on the hardware revision, not the nominal 500 V designation alone.

Suntree · SUP2-PV-3P-1000V

Three-module photovoltaic surge protector for one DC circuit, not three independent circuits. Connected in parallel, with a protective-earth path and separate overcurrent protection. Uc and Up depend on the hardware revision, not the nominal 1000 V designation alone.

Suntree · SUP1-40-4P-385V

Four-module AC surge protector with L1, L2, L3 and N connections. Uc 385 V AC, In 20 kA, Imax 40 kA and Up ≤ 1.8 kV. Connected in parallel with separate backup protection; it is neither a circuit breaker nor a residual-current device.

Schneider Electric · LC1D806BD

LC1D806BD switches three power poles: 80 A AC-3 at ≤440 V AC, with a 24 V DC coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D40AM7

LC1D40AM7 switches three power poles: 40 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D326BL

LC1D326BL switches three power poles: 32 A AC-3 at ≤440 V AC, with a 24 V DC coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D150M7

LC1D150M7 switches three power poles: 150 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D40AQ7

LC1D40AQ7 switches three power poles: 40 A AC-3 at ≤440 V AC, with a 380 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D50AM7

LC1D50AM7 switches three power poles: 50 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D25B7

LC1D25B7 switches three power poles: 25 A AC-3 at ≤440 V AC, with a 24 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D65AM7

LC1D65AM7 switches three power poles: 65 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D25M7

LC1D25M7 switches three power poles: 25 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

Schneider Electric · LC1D95M7

LC1D95M7 switches three power poles: 95 A AC-3 at ≤440 V AC, with a 220 V AC 50/60 Hz coil. Preserve its exact connection and coil suffix.

KBE · KBE-SOLAR-DB-H1Z2Z2-K

Configurable single-core H1Z2Z2-K DC photovoltaic cable for string wiring between PV modules, DC isolation and protection, and inverter MPPT inputs.

Nexans · NEXANS-PV-DC-H1Z2Z2-K

Morocco-made single-core H1Z2Z2-K photovoltaic DC cable for string wiring, DC isolation and protection, and inverter MPPT inputs.

Ingelec · CM5402035

Empty steel cabinet, 500 × 400 × 200 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · CM6402635

Empty steel cabinet, 600 × 400 × 260 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · CM6502635

Empty steel cabinet, 600 × 500 × 260 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · CM7502635

Empty steel cabinet, 700 × 500 × 260 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · CM4302035

Empty steel cabinet, 400 × 300 × 200 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · CM8602635

Empty steel cabinet, 800 × 600 × 260 mm (height × width × depth), IP55 and IK10. Select the mounting plate and protection equipment separately.

Ingelec · PP0504

Perforated 2 mm galvanized steel mounting plate. Fits a 500 × 400 mm Metalbox; the plate itself measures 460 × 340 mm.

Ingelec · PP0605

Perforated 2 mm galvanized steel mounting plate. Fits a 600 × 500 mm Metalbox; the plate itself measures 560 × 440 mm.

Ingelec · PP0705

Perforated 2 mm galvanized steel mounting plate. Fits a 700 × 500 mm Metalbox; the plate itself measures 660 × 440 mm.

Ingelec · PP0604

Perforated 2 mm galvanized steel mounting plate. Fits a 600 × 400 mm Metalbox; the plate itself measures 560 × 340 mm.

Ingelec · P6040

White RAL 9016 PVC skirting for surface cable routing, horizontally or vertically. Fittings and the optional separator are separate.

Ingelec · P6040E

External corner for Ingelec P6040 60 × 40 mm skirting. White RAL 9016 PVC; match the fitting to the cable route.

Ingelec · P6040I

Internal corner for Ingelec P6040 60 × 40 mm skirting. White RAL 9016 PVC; match the fitting to the cable route.

Ingelec · P6040L

Flat corner for Ingelec P6040 60 × 40 mm skirting. White RAL 9016 PVC; match the fitting to the cable route.

Ingelec · P6040T

T junction for Ingelec P6040 60 × 40 mm skirting. White RAL 9016 PVC; match the fitting to the cable route.

Ingelec · P6040S

End cap for Ingelec P6040 60 × 40 mm skirting. White RAL 9016 PVC; match the fitting to the cable route.

Ingelec · G4040

Grey PVC slotted duct, 40 × 40 mm, supplied with its cover in a 2 m length. Organizes wiring inside equipment cabinets.

Ingelec · G6040

Grey PVC slotted duct, 60 × 40 mm, supplied with its cover in a 2 m length. Organizes wiring inside equipment cabinets.

Ingelec · G6060

Grey PVC slotted duct, 60 × 60 mm, supplied with its cover in a 2 m length. Organizes wiring inside equipment cabinets.

Ingelec · G6080

Grey PVC slotted duct, 60 × 80 mm, supplied with its cover in a 2 m length. Organizes wiring inside equipment cabinets.

Ingelec · G8080

Grey PVC slotted duct, 80 × 80 mm, supplied with its cover in a 2 m length. Organizes wiring inside equipment cabinets.

Ingelec · 65/33N

Reinforced perforated steel tray, 65 × 33 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 95/33N

Reinforced perforated steel tray, 95 × 33 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 125/63N

Reinforced perforated steel tray, 125 × 63 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 215/63N

Reinforced perforated steel tray, 215 × 63 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 95/63N

Reinforced perforated steel tray, 95 × 63 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 305/63N

Reinforced perforated steel tray, 305 × 63 mm (width × side height), in 3 m lengths. Galvanized Z275; supports and cover are separate.

Ingelec · 65/33NC

Galvanized steel clip-on cover for the 65 × 33 mm cable-tray reference. Confirm the exact tray and delivered length before ordering.

Ingelec · 95/33NC

Galvanized steel clip-on cover for the 95 × 33 mm cable-tray reference. Confirm the exact tray and delivered length before ordering.

Ingelec · 125/33NC

Galvanized steel clip-on cover for the 125 × 33 mm cable-tray reference. Confirm the exact tray and delivered length before ordering.

Unbranded materials · RW-SANDWICH-30

Insulated roofing panel with a requested 30 mm core. Quotation per m², with panel dimensions and the supplied construction confirmed before ordering.

Unbranded materials · RW-SANDWICH-40

Insulated roofing panel with a requested 40 mm core. Quotation per m², with panel dimensions and the supplied construction confirmed before ordering.

Unbranded materials · RW-RAIL-GALV

Perforated steel rail for mechanical mounting. Request the section and bar length; the quote confirms the supplied coating and fixing arrangement.

Unbranded materials · RW-RAIL-PREGALV

Steel rail requested in a pre-galvanized finish. The supplier confirms the profile, perforations, coating and treatment of cut or fabricated areas.

Unbranded materials · RW-STEEL-H

H-section steel for a specified support structure. Confirm section designation, steel grade, length, finish and the structural design before ordering.

Unbranded materials · RW-BOLT

Bolts for a specified mechanical joint. Match diameter, pitch, length, head type, strength class and coating to the joint design and mating nut.

Unbranded materials · RW-NUT

Nuts for the specified bolt and joint. Match thread diameter and pitch, strength class, locking method and finish; a similar appearance does not establish a match.

Unbranded materials · RW-WASHER

Flat washers for the specified mechanical joint. Confirm inner and outer diameters, thickness, material and finish; roof sealing washers are a separate selection.

Unbranded materials · RW-STEEL-SHEET

Single-skin steel roof covering quoted per m². The quote identifies the profile, sheet thickness, coating, lengths, useful width and billed surface.