7 independent operating points
7 MPPTs track 7 deliberately designed PV zones.
Huawei publishes 21 inputs, 48 A per MPPT, 23 A per input and 66 A maximum short-circuit current per MPPT.

Exact reference · SUN2000-150K-MG0
A 150 kW grid-following inverter with 7 independent MPPTs and 21 physical PV inputs. It has no battery interface, backup output, transfer switch or off-grid mode.
Defines inverter capacity, not the approved array or site service.
up to three per MPPT remain governed by per-input and combined-tracker limits.
Every string must remain inside the valid range across temperature.
High-current modules and parallel strings require explicit validation.
A valid AC reference is required; this inverter does not form an islanded grid.
Do not select the 150 kW reference from nominal power alone. Confirm every string, MPPT allocation, 380/400/480 V service, AC current, protection, conductors, cooling clearances and plant-control architecture.
Pricing confirmed by quote
The written quote confirms the exact reference, required accessories, compatibility, delivery and commercial terms.
Availability confirmed in your written quote
01 · Product role
The SUN2000-150K-MG0 converts DC power from up to 21 deliberately allocated PV string inputs into grid-synchronised three-phase AC. 7 MPPTs track 7 suitable operating points. Utility and protected distribution remain directly connected on the AC side.
Relevant applications
Why ReneWave may shortlist it
Built-in capabilities
7 MPPTs track 7 deliberately designed PV zones.
Huawei publishes 21 inputs, 48 A per MPPT, 23 A per input and 66 A maximum short-circuit current per MPPT.

The inverter converts available PV power into synchronised commercial AC.
Rated output is 150,000 W with 165,000 VA maximum apparent power.

String monitoring supports commissioning and operational diagnosis.
RS485 and optional communications equipment connect the reviewed monitoring architecture.

AFCI · Smart String Level Disconnector · string-fault monitoring · PID recovery are documented functions.
External project protection, conductors and earthing remain design work.
Inside the energy system
Solar conversion follows the utility AC reference. No battery or backup path is shown.
21 designed inputs pass through 7 MPPTs and the inverter to serve protected site loads.
Seven trackers and twenty-one inputs for a deliberately structured commercial array.
The SUN2000-150K-MG0 is a grid-following commercial string inverter. It does not accept batteries or provide backup power. 21 physical inputs are grouped behind 7 MPPTs and must be calculated accordingly.
02 · Specifications
1,100 V
200–1,000 V
7 MPPTs · 21 inputs total
48 A per MPPT · 23 A per input · 66 A maximum Isc per MPPT
150,000 W · 165,000 VA
380/400/480 V three phase · 227.9/253.2 A at 380 V · 216.5/240.5 A at 400 V · 180.4/200.5 A at 480 V nominal/maximum
98.6% at 400 V · 98.8% at 480 V · 98.4%
AFCI · Smart String Level Disconnector · string-fault monitoring · PID recovery
IP66 · smart-air cooling
1,000 × 710 × 395 mm
≤99 kg without mounting plate
03 · Confirm before quotation
ReneWave confirms the electrical context, connected equipment, installation conditions and configuration path before the exact reference enters a written quote.

Confirm cold Voc, voltage, current and allocation for all 21 inputs and 7 trackers.

Confirm 380/400/480 V service, grid code, full-load range and AC current.

Confirm isolation, conductors, surge coordination, earthing, mounting and smart-air clearances.

Confirm RS485, metering, SmartLogger, FusionSolar ownership and commissioned settings.
04 · Documents & warranty
Documents shown here support selection and handover. The accepted order and exact manufacturer warranty document control.
5 years · applicable non-European C&I policy
05 · Complete the system
Select relevant companions now. ReneWave still verifies quantities and compatibility before they appear in the written quote.
Recommended companions

Huawei FusionSolar · SMARTLOGGER3000A
Huawei SmartLogger3000A PV Plant Communications ControllerAdds plant-level communications, commissioning and supported control coordination. Use only after the exact SmartLogger suffix, plant communications design, MG0 firmware and commissioned control architecture are confirmed.
RENEWAVEEnergy systems, held to standard.