
Stores DC energy
Provides a 270 Ah nominal 12 V storage increment at the stated 20-hour test.
This battery contains no AC conversion equipment.

Exact reference · OT270-12(GEL)/CD
High-capacity 12 V GEL storage for a deliberately designed battery bank and inverter/charger.
This rating is test-condition dependent and is not a usable-energy guarantee.
Calculated from 12 V × 270 Ah; actual delivered energy depends on rate, voltage cutoff, temperature and condition.
Autonomy calculations must use the relevant discharge regime rather than the 20-hour headline.
The compatible charger and temperature compensation must be configured for the battery bank.
Handling, support, conductor termination and protective covers require project planning.
Do not select this battery from 270 Ah or “12 V” alone. Confirm required autonomy, discharge rate, bank voltage, matched battery quantity, charge profile, temperature compensation, conductors, protection, ventilation and handling.
Pricing confirmed by quote
The written quote confirms the exact reference, required accessories, compatibility, delivery and commercial terms.
Availability confirmed in your written quote
01 · Product role
The OT270-12(GEL)/CD is a sealed lead-acid GEL battery that stores DC energy. A separately selected inverter/charger converts power, controls charging and supplies AC loads. The battery has no BMS communications and cannot operate AC equipment by itself.
Relevant applications
Why ReneWave may shortlist it
Built-in capabilities

Provides a 270 Ah nominal 12 V storage increment at the stated 20-hour test.
This battery contains no AC conversion equipment.

Uses a GEL deep-cycle lead-acid architecture intended for controlled cyclic service.
Sealed construction does not remove ventilation, protection or handling requirements.

The external charger must respect the documented current, cycle and float settings.
Temperature compensation and complete-bank behavior remain project-specific.

One-hour, three-hour and twenty-hour values support a more realistic autonomy review.
Headline amp-hours cannot be applied unchanged at every load.
System position
The inverter/charger, PV conversion, protection and AC distribution are separate equipment. No direct PV-to-battery, battery-to-AC-load or grid-export path is represented.
PV supplies protected loads through the compatible inverter while the OUTDO battery bank remains idle.
High-capacity 12 V GEL storage for a deliberately designed battery bank and inverter/charger.
The OT270-12(GEL)/CD stores DC energy. It does not contain an inverter, solar charger, AC charger, transfer switch or independent AC output. Its available capacity changes materially with discharge rate, temperature, cutoff voltage, age and charging history.
Source revision boundary
ReneWave publishes the values from the exact supplier-retained sheet for the requested grey-container reference. A separate manufacturer-authored mirror reports conflicting values and the current OUTDO catalog does not visibly list this 270 Ah model, so the delivered nameplate, container variant and charging record are reconfirmed in the written quotation.
02 · Specifications
Sealed GEL lead-acid
12 V
270 Ah at 25°C
Approximately 3.24 kWh · not usable energy
195 Ah at 62.5 A
160 Ah at 137.5 A
Less than 75 A
14.5–14.9 V
13.6–13.8 V
3 mΩ fully charged at 25°C
T2 · M8 connection
520 × 269 × 220 mm
Approximately 225 mm
Approximately 72.3 kg
Grey supplied-sheet presentation; delivered variant confirmed in writing
03 · Confirm before quotation
ReneWave confirms the electrical context, connected equipment, installation conditions and configuration path before the exact reference enters a written quote.

Confirm inverter/charger support for the complete bank voltage, GEL cycle/float settings, current limit and temperature compensation.

Calculate autonomy from the applicable discharge curve, cutoff voltage, temperature, age and inverter efficiency.

Confirm matched batteries, equal current paths, conductors, fusing, isolation, terminal protection and fault-current boundaries.

Confirm ventilation, structural support, handling, delivered nameplate, source revision and written warranty record.
04 · Documentation
Published documents for this exact reference support selection and handover.
05 · Complete the system
Select relevant companions now. ReneWave still verifies quantities and compatibility before they appear in the written quote.
No additional equipment is published for this reference. Required accessories are confirmed during quotation.
RENEWAVEEnergy systems, held to standard.