Stores DC energy
Provides a rate-defined 12 V GEL storage increment.
100 Ah at the ten-hour test; no independent AC output.
OUTDOBudget
OUTDO OT100 12 V 100 Ah GEL Deep-Cycle Battery
Exact reference · OT100-12(GEL)/CD
Rate-defined 12 V GEL storage for a deliberately designed battery bank and inverter/charger.
- Capacity test
- 100 Ah · 10 hours · 10 A · 25°C
An early-cycle average, not a guaranteed minimum.
- Higher-rate capacity
- 61 Ah at 1 hour · 79 Ah at 3 hours
Use the relevant discharge test for autonomy calculations.
- Charging
- <30 A initial · 14.5–14.9 V cycle
Float charging is 13.6–13.8 V at 25°C; temperature compensation must be configured.
- Handling
- Approximately 30.5 kg · T3 / M8
Support, termination and protective measures require review.
Do not select this battery from 100 Ah or “12 V” alone. Confirm autonomy, discharge rate, bank voltage, matched battery count, charge settings, temperature compensation, conductors, protection, ventilation and handling.
Pricing confirmed by quote
The written quote confirms the exact reference, required accessories, compatibility, delivery and commercial terms.
Availability confirmed in your written quote
1
01 · Product role
What this product does in the system.
A sealed GEL lead-acid battery for a deliberately designed DC bank and compatible inverter/charger. It contains no inverter, MPPT, AC charger, BMS communications, transfer switch or independent AC output. Capacity depends on discharge rate, cutoff voltage, temperature, storage history, age and charging conditions.
Relevant applications
- Off-grid GEL battery banks
- Configured inverter-backed loads
Why ReneWave may shortlist it
- 100 Ah at the ten-hour test with separate higher-rate results.
- Documented charging windows support a reviewed bank design.
Built-in capabilities
Four functions, read before the headline specifications.
Sealed GEL construction
Supports controlled cyclic lead-acid service.
Sealed construction does not remove ventilation requirements.
Defined charge settings
Requires a compatible external charger.
Initial charging below 30 A; cycle and float voltage settings are distinct.
Rate-aware sizing
Publishes one-, three- and ten-hour capacity records.
Do not apply the C10 capacity unchanged at a higher discharge rate.
System position
Storage behind a compatible inverter/charger.
PV conversion, inverter/charger and AC distribution are separate equipment. No direct PV-to-battery, battery-to-AC-load, standalone backup or grid-export path is represented.
Solar supplies protected loads through the inverter while the battery bank is idle.
Read the technical explanation
A sealed GEL lead-acid battery for a deliberately designed DC bank and compatible inverter/charger. It contains no inverter, MPPT, AC charger, BMS communications, transfer switch or independent AC output. Capacity depends on discharge rate, cutoff voltage, temperature, storage history, age and charging conditions.
The manufacturer sheet reports averages from the first three charge/discharge cycles, not guaranteed minimum values. The historical grey-container /CD reference is not interchangeable with current DS, CN or digital-screen models. Do not select this battery from 100 Ah or “12 V” alone. Confirm autonomy, discharge rate, bank voltage, matched battery count, charge settings, temperature compensation, conductors, protection, ventilation and handling.
02 · Specifications
Ratings, dimensions and practical consequence.
Battery and charging
- Nominal voltage
12 V
- Capacity at 10 hours
100 Ah at 10 A and 25°C
- Nominal arithmetic energy
Approximately 1.2 kWh · not usable energy
- Capacity at 3 hours
79 Ah at 25 A
- Capacity at 1 hour
61 Ah at 55 A
- Initial charging current
Less than 30 A
- Cycle charging
14.5–14.9 V at 25°C
- Float charging
13.6–13.8 V at 25°C
- Internal resistance
5 mΩ fully charged at 25°C
- Terminals
T3 arrangement · M8 connection
Physical record
- Case dimensions
333 × 173 × 216 mm (±2 mm)
- Total height
222 mm (±2 mm)
- Weight
Approximately 30.5 kg
03 · Confirm before quotation
Four checks before this reference is quoted.
ReneWave confirms the electrical context, connected equipment, installation conditions and configuration path before the exact reference enters a written quote.
- 01
Bank architecture
Confirm voltage, matched battery quantity and series/parallel design.
- 02
Rate and autonomy
Calculate autonomy for load, cutoff voltage, temperature and age.
- 03
Protection and handling
Design conductors, fusing, isolation, ventilation and structural support.
- 04
Charge profile and revision
Verify GEL settings, temperature compensation, exact nameplate and commissioning.
04 · Documentation
Keep the exact reference traceable.
Published documents for this exact reference support selection and handover.
OUTDO OT100-12(GEL)/CD Technical Datasheetdatasheet · Supplier-retained manufacturer record · EnglishV202104 · manufacturer sheet 302020001-00029 · two pages · exact reference
05 · Complete the system
Accessories and adjacent equipment, in one request.
Select relevant companions now. ReneWave still verifies quantities and compatibility before they appear in the written quote.
No additional equipment is published for this reference. Required accessories are confirmed during quotation.
1
